• Ny
Optimum fræser OPTImill MF 4-B
search
  • Optimum fræser OPTImill MF 4-B
  • Optimum fræser OPTImill MF 4-B
  • Optimum fræser OPTImill MF 4-B
  • Optimum fræser OPTImill MF 4-B
  • Optimum fræser OPTImill MF 4-B
  • Optimum fræser OPTImill MF 4-B

Optimum fræser OPTImill MF 4-B

141.250,00 kr
Inkl. moms

Optimum fræser MF 4-B

Multifunctional drilling-milling machines with mechanically steplessly adjustable drive for professional use

Antal

Cooling lubricant system
Coolant pump(s) drive power 90 W
Dimensions and weights
Length 2400 mm
Width/depth 2160 mm
Height 2300 mm
Weight approx. 1200 kg
Drilling/milling output
Max. sensor head size 76 mm
Max. shaft milling cutter size 25 mm
Drilling performance steel (S235JR) 24 mm
Continuous drilling performance steel (S235JR) 20 mm
Electric Data
Supply voltage 400 V
Mains frequency 50 Hz
Electrical connections
Total rated value 3 kW
Horizontal spindle
Reach 0 – 420 mm
Milling table horizontal
Table length 254 mm
Table width 1370 mm
Max. clearance vertical spindle - milling table 405 mm
T-groove size 16 mm
T-groove number 3
T-groove spacing 63 mm
Max. load bearing capacity 300 kg
Motor(s)
Vertical spindle normal operation 2.2 kW
Standards and certifications
Standard DIN EN 55011
EMC level C2
Travel
X axis manual 820 mm
Y axis manual 410 mm
Z axis manual 400 mm
X axis automatic 740 mm
Y axis automatic 330 mm
Z axis automatic 320 mm
Vertical spindle
Reach 0 – 420 mm
Spindle chuck ISO 40 DIN 2080
Speed range 60 – 4200 min¯¹
Number of gears 2
Speed control mechanically stepless
Swivel range milling cutter head X - Y plane 90 °
Swivel range milling cutter head Z - X plane 45 °
Quill diameter 86 mm
Quill stroke 127 mm
Spindle sleeve feed 0.04 / 0.08 / 0.15 mm/rev
Milling head travel Z axis 470 mm
  • Solid design made of high-quality meehanite casting
  • High concentricity due to tapered roller bearing, measured smaller than 0.01 mm in the quill
  • Stepless speed control
  • Right / left rotation for thread cutting
  • X- and Z-axis with adjustable 55 ° dovetail guide
  • Y-axis with flat guide
  • Drilling milling head inclinable ± 45 °
  • Coolant system
  • Right and left rotation
  • Automatic quill feed, 3-stage 0.04 - 0.15 mm / rev
  • Motor feed in the X, Y and Z axes
  • Precision micro feed
  • Milling spindle with precision bearing
  • Mechanical spindle brake
  • Drilling depth scale and strok
  • Cross table with T-slots and coolant channel
  • Central lubrication
  • Height-adjustable protective screen with micro-switch, against flying chips and parts, for maximum protection of the user
  • Massive and large-dimensioned XY stage, precisely surface-finished with T-slots

MF 4-B:

  • Load capacity cross table 300 kg<
  • Large travel: X / Y / Z axis 740 mm / 330 mm / 320 mm

2295-3348340

Specifikke referencer