![Schweisskraft Easy-Tig 201 AC/DC PULSE Schweisskraft Easy-Tig 201 AC/DC PULSE](https://kamas.dk/136627-large_default/easy-tig-201acdc-pilse.jpg)
Method
Sheet thicknesses
Base materials
Device data | |
---|---|
Pulse frequency | 0.5 – 200 Hz |
Ignition | high frequency |
Torch cooling | air |
Dimensions and weights | |
---|---|
Length | 460 mm |
Width/depth | 150 mm |
Height | 280 mm |
Weight approx. | 9 kg |
Duty cycle | |
---|---|
at Imax. 40°C TIG DC | 40 % |
at Imax. 40°C electrode | 30 % |
Current at 100% DC 40°C TIG DC | 110 A |
Current at 100% DC 40°C electrode | 95 A |
Electric Data | |
---|---|
Supply voltage | 230±10% V |
Phase(s) | 1 Ph |
Current type | AC |
Mains frequency | 50/60 Hz |
Electrical connections | |
---|---|
Total output | AC TIG 7.8/DC TIG 6.7/AC MMA 9.2/DC MMA 9.8 kVA |
Input current TIG AC | 34 A |
Input current TIG DC | 29.1 A |
Input current electrode AC | 40.2 A |
Input current electrode DC | 42.9 A |
Electrode | |
---|---|
Weldable electrodes | 1.6 - 4.0 mm |
Power consumption | |
---|---|
TIG DC | 4 kVA |
Electrode | 5.9 kVA |
Setting range | |
---|---|
TIG DC | 10 - 170 A |
Electrode | 10 - 170 A |
Standards and certifications | |
---|---|
Standard | EN 60974-1:2012/EN 60974-10:2014 |
EMC class | A |
Explanation EMC class | This Class A welding equipment is not intended for use in residential areas where power is supplied by a public low-voltage power supply system. |
Migatronic Focus TIG 200A giver dig tre maskiner i en, med TIG svejsning
af alle materialer, også aluminium.
TIG pulsfunktionen giver bedre kontrol
af svejsebadet. HF/LIFTIG giver tænding
med eller uden højfrekvens. MMA gør
det muligt at svejse med alle gængse
elektrodetyper. FOCUS TIG 200 AC/DC er
naturligvis udstyret med MIGA Super Blue
wolframelektroder, der kan bruges til alle
typer materialer.
Method
Sheet thicknesses
Base materials