| Bending performances profile type optional | |
|---|---|
| Square tube dimensions [1] | 40 x 3 mm |
| Square tube min. bending Ø [1] | 1200 mm |
| Square tube dimensions [2] | 30 x 2 mm |
| Square tube min. bending Ø [2] | 800 mm |
| Square tube heavy axis dimensions bending Ø [1] | 50 x 30 x 3 mm |
| Square tube heavy axis min. bending Ø [1] | 1200 mm |
| Square tube heavy axis dimensions bending Ø [2] | 40 x 20 x 2 mm |
| Square tube heavy axis min. bending Ø [2] | 800 mm |
| Round tube dimensions [1] | 38.1 x 2.9 mm |
| Round tube min. bending Ø [1] | 600 mm |
| Round tube dimensions [2] | 6.35 x 1.8 mm |
| Round tube min. bending Ø [2] | 300 mm |
| Round profile dimensions [1] | 30 mm |
| Round profile min. bending Ø [1] | 900 mm |
| Round profile dimensions [2] | 10 mm |
| Round profile min. bending Ø [2] | 200 mm |
| isosceles angle profile outside dimensions [1] | 40 x 40 x 5 mm |
| isosceles angle profile outside leg min. bending Ø [1] | 600 mm |
| isosceles angle profile outside dimensions [2] | 30 x 30 x 4 mm |
| isosceles angle profile outside leg min. bending Ø [2] | 300 mm |
| isosceles angle profile inside dimensions [1] | 35 x 35 x 5 mm |
| isosceles angle profile inside leg min. bending Ø [1] | 600 mm |
| isosceles angle profile inside dimensions [2] | 30 x 30 x 4 mm |
| Explanations for bending performance, profile type optional | The performance data apply to material with a max. Yield strength of 24kg / mm². Bending power at VA: factor 0.7 |
| Bending performances profile type standard | |
|---|---|
| Square material dimensions [1] | 30 mm |
| Square material min. bending Ø [1] | 900 mm |
| Square material dimensions [2] | 10 mm |
| Square material min. bending Ø [2] | 200 mm |
| Flat material light axis dimensions bending Ø [1] | 80 x 15 mm |
| Flat material light axis min. bending Ø [1] | 700 mm |
| Flat material light axis dimensions bending Ø [2] | 30 x 6 mm |
| Flat material light axis min. bending Ø [2] | 400 mm |
| Flat material heavy axis dimensions bending Ø [1] | 50 x 10 mm |
| Flat material heavy axis min. bending Ø [1] | 800 mm |
| Flat material heavy axis dimensions bending Ø [2] | 20 x 6 mm |
| Flat material heavy axis min. bending Ø [2] | 300 mm |
| UPN profile top rib dimensions [1] | 50 x 6 mm |
| T profile top rib min. bending Ø [1] | 600 mm |
| UPN profile top rib dimensions [2] | 20 x 3 mm |
| T profile top rib min. bending Ø [2] | 400 mm |
| Explanation for T profile rib above | Additional spacers may be required |
| UPN profile outside rib dimensions [1] | 50 x 6 mm |
| T profile outside rib min. bending Ø [1] | 600 mm |
| UPN profile outside rib dimensions [2] | 20 x 3 mm |
| T profile outside rib min. bending Ø [2] | 400 mm |
| UPN profile inside rib dimensions [1] | 50 x 6 mm |
| T profile inside rib min. bending Ø [1] | 600 mm |
| UPN profile inside rib dimensions [2] | 20 x 3 mm |
| T profile inside rib min. bending Ø [2] | 400 mm |
| UPN profile outside leg dimensions [1] | U50x25 mm |
| UPN profile outside leg min. bending Ø [1] | 600 mm |
| UPN profile outside leg dimensions [2] | U30x15 mm |
| UPN profile outside leg min. bending Ø [2] | 400 mm |
| UPN profile inside leg dimensions [1] | U50x25 mm |
| UPN profile inside leg min. bending Ø [1] | 600 mm |
| UPN profile inside leg dimensions [2] | U30x15 mm |
| Inside leg min. bending Ø [2] | 400 mm |
| Explanations for bending performance, profile type standard | The performance data apply to material with a max. Yield strength of 24kg / mm². Bending power at VA: factor 0.7 |
| Dimensions and weights | |
|---|---|
| Length | 600 mm |
| Width/depth | 800 mm |
| Height | 1450 mm |
| Weight approx. | 220 kg |
| Drive output | |
|---|---|
| Main motor | 0.75 kW |
| Electric Data | |
|---|---|
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
| Machine data | |
|---|---|
| Shaft diameter top | 30 mm |
| Shaft diameter bottom | 30 mm |
| Roller diameter top | 148 mm |
| Roller diameter bottom | 118 mm |
| Speed | 4 m/min |
Hydraulic and universally applicable with NC control for immersion depth
Can be used horizontally and vertically for profiles and tubes with foot control
Can be used horizontally and vertically for profiles, tubes and solid material.
(Vist med ekstraudstyr som kan tilkøbes)
Hydraulic and universally applicable with NC control for immersion depth
Can be used horizontally and vertically for profiles, tubes and solid material
