| Bending performances profile type optional | |
|---|---|
| Square tube dimensions [1] | 25 x 2 mm |
| Square tube min. bending Ø [1] | 450 mm |
| Square tube heavy axis dimensions bending Ø [1] | 30 x 15 x 2.5 mm |
| Square tube heavy axis min. bending Ø [1] | 500 mm |
| Round tube dimensions [1] | 25.4 x 2.3 mm |
| Round tube min. bending Ø [1] | 300 mm |
| Round profile dimensions [1] | 22 mm |
| Round profile min. bending Ø [1] | 200 mm |
| isosceles angle profile outside dimensions [1] | 35 x 35 x 5 mm |
| isosceles angle profile outside leg min. bending Ø [1] | 400 mm |
| isosceles angle profile inside dimensions [1] | 30 x 30 x 4 mm |
| isosceles angle profile inside leg min. bending Ø [1] | 550 mm |
| Explanations for bending performance, profile type optional | The performance data apply to material with a max. Yield strength of 24kg / mm². Bending power at VA: factor 0.7 |
| Bending performances profile type standard | |
|---|---|
| Square material dimensions [1] | 18 mm |
| Square material min. bending Ø [1] | 250 mm |
| Flat material light axis dimensions bending Ø [1] | 50 x 12 mm |
| Flat material light axis min. bending Ø [1] | 400 mm |
| Flat material heavy axis dimensions bending Ø [1] | 35 x 8 mm |
| Flat material heavy axis min. bending Ø [1] | 300 mm |
| UPN profile top rib dimensions [1] | 35 x 5 mm |
| T profile top rib min. bending Ø [1] | 400 mm |
| Explanation for T profile rib above | Additional spacers may be required |
| UPN profile outside rib dimensions [1] | 30 x 5 mm |
| T profile outside rib min. bending Ø [1] | 300 mm |
| UPN profile inside rib dimensions [1] | 35 x 5 mm |
| T profile inside rib min. bending Ø [1] | 300 mm |
| UPN profile outside leg dimensions [1] | UPN 40x20 mm |
| UPN profile outside leg min. bending Ø [1] | 350 mm |
| UPN profile outside leg dimensions [2] | UPN 35 x 18 |
| UPN profile outside leg min. bending Ø [2] | 500 mm |
| UPN profile inside leg dimensions [1] | U30x15 mm |
| UPN profile inside leg min. bending Ø [1] | 500 mm |
| Explanations for bending performance, profile type standard | The performance data apply to material with a max. Yield strength of 24kg / mm². Bending power at VA: factor 0.7 |
| Dimensions and weights | |
|---|---|
| Length | 1050 mm |
| Width/depth | 500 mm |
| Height | 1250 mm |
| Weight approx. | 350 kg |
| Drive output | |
|---|---|
| Main motor | 1.1 kW |
| Electric Data | |
|---|---|
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
| Machine data | |
|---|---|
| Shaft diameter top | 35 mm |
| Shaft diameter bottom | 35 mm |
| Roller diameter top | 137 mm |
| Roller diameter bottom | 137 mm |
| Speed | 7 m/min |
Can be used horizontally and vertically for profiles, tubes and solid material.
(Vist med ekstraudstyr som kan tilkøbes)
Hydraulic and universally applicable with NC control for immersion depth
Hydraulic and universally applicable with NC control for immersion depth
Can be used horizontally and vertically for profiles, tubes and solid material
Can be used horizontally and vertically for profiles and tubes with foot control
