| Bending performances profile type optional | |
|---|---|
| Square tube dimensions [1] | 50 x 3 mm |
| Square tube min. bending Ø [1] | 1700 mm |
| Square tube dimensions [2] | 40 x 3 mm |
| Square tube min. bending Ø [2] | 600 mm |
| Square tube heavy axis dimensions bending Ø [1] | 70 x 30 x 2 mm |
| Square tube heavy axis min. bending Ø [1] | 1200 mm |
| Square tube heavy axis dimensions bending Ø [2] | 50 x 40 x 3 mm |
| Square tube heavy axis min. bending Ø [2] | 1200 mm |
| Round tube dimensions [1] | 50.8 x 2.9 mm |
| Round tube min. bending Ø [1] | 1000 mm |
| Round tube dimensions [2] | 25.4 x 2.3 mm |
| Round tube min. bending Ø [2] | 350 mm |
| Round profile dimensions [1] | 35 mm |
| Round profile min. bending Ø [1] | 600 mm |
| Round profile dimensions [2] | 30 mm |
| Round profile min. bending Ø [2] | 400 mm |
| isosceles angle profile outside dimensions [1] | 50 x 50 x 5 mm |
| isosceles angle profile outside leg min. bending Ø [1] | 800 mm |
| isosceles angle profile outside dimensions [2] | 40 x 40 x 5 mm |
| isosceles angle profile outside leg min. bending Ø [2] | 600 mm |
| isosceles angle profile inside dimensions [1] | 50 x 50 x 6 mm |
| isosceles angle profile inside leg min. bending Ø [1] | 1000 mm |
| isosceles angle profile inside dimensions [2] | 30 x 30 x 3 mm |
| Explanations for bending performance, profile type optional | The performance data apply to material with a max. Yield strength of 24kg / mm². Bending power at VA: factor 0.7 |
| Bending performances profile type standard | |
|---|---|
| Square material dimensions [1] | 35 mm |
| Square material min. bending Ø [1] | 900 mm |
| Square material dimensions [2] | 20 mm |
| Square material min. bending Ø [2] | 300 mm |
| Flat material light axis dimensions bending Ø [1] | 100 x 15 mm |
| Flat material light axis min. bending Ø [1] | 450 mm |
| Flat material light axis dimensions bending Ø [2] | 60 x 10 mm |
| Flat material light axis min. bending Ø [2] | 350 mm |
| Flat material heavy axis dimensions bending Ø [1] | 60 x 10 mm |
| Flat material heavy axis min. bending Ø [1] | 500 mm |
| Flat material heavy axis dimensions bending Ø [2] | 40 x 10 mm |
| Flat material heavy axis min. bending Ø [2] | 400 mm |
| UPN profile top rib dimensions [1] | 60 x 7 mm |
| T profile top rib min. bending Ø [1] | 700 mm |
| UPN profile top rib dimensions [2] | 50 x 6 mm |
| T profile top rib min. bending Ø [2] | 500 mm |
| Explanation for T profile rib above | Additional spacers may be required |
| UPN profile outside rib dimensions [1] | 60 x 7 mm |
| T profile outside rib min. bending Ø [1] | 700 mm |
| UPN profile outside rib dimensions [2] | 50 x 6 mm |
| T profile outside rib min. bending Ø [2] | 500 mm |
| UPN profile inside rib dimensions [1] | 60 x 7 mm |
| T profile inside rib min. bending Ø [1] | 700 mm |
| UPN profile inside rib dimensions [2] | 50 x 6 mm |
| T profile inside rib min. bending Ø [2] | 500 mm |
| UPN profile outside leg dimensions [1] | UPN 80 mm |
| UPN profile outside leg min. bending Ø [1] | 1000 mm |
| UPN profile outside leg dimensions [2] | UPN 30 mm |
| UPN profile outside leg min. bending Ø [2] | 700 mm |
| UPN profile inside leg dimensions [1] | UPN 80 mm |
| UPN profile inside leg min. bending Ø [1] | 1200 mm |
| UPN profile inside leg dimensions [2] | UPN 30 mm |
| Inside leg min. bending Ø [2] | 800 mm |
| Explanations for bending performance, profile type standard | The performance data apply to material with a max. Yield strength of 24kg / mm². Bending power at VA: factor 0.7 |
| Dimensions and weights | |
|---|---|
| Length | 750 mm |
| Width/depth | 1000 mm |
| Height | 1400 mm |
| Weight approx. | 400 kg |
| Drive output | |
|---|---|
| Main motor | 1.5 kW |
| Electric Data | |
|---|---|
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
Machine data | |
|---|---|
| Shaft diameter top | 50 mm |
| Shaft diameter bottom | 50 mm |
| Roller diameter top | 155 mm |
| Roller diameter bottom | 155 mm |
| Speed |
4.5 m/min |
Hydraulic and universally applicable with NC control for immersion depth
Hydraulic and universally applicable with NC control for immersion depth
Can be used horizontally and vertically for profiles and tubes with foot control
Can be used horizontally and vertically for profiles, tubes and solid material
Can be used horizontally and vertically for profiles, tubes and solid material.
(Vist med ekstraudstyr som kan tilkøbes)
