Optimum drejebænk OPTIturn TM 4010D

97.250,00 kr

Inkl. moms

Optimum drejebænk TM 4010D

Leading and tensioning spindle lathes impress with their sturdy construction and easy handling. TM 4010D with digital position indicator DPA 21

Antal

Cooling lubricant system
Coolant pump output	100 W

Drive output
Main motor	2.2 kW

Electric Data
Supply voltage	400 V
Mains frequency	50 Hz

Electrical connections
Total rated value	2.3 kW

Feed
Longitudinal feed range	0.014 – 0.38 mm/rev
Flat feed range	0.052 – 1.392 mm/rev

Pitches
Metric pitch	0.4 – 7 mm/rev
Imperial pitch	56 – 4 Threads/1"

Speed range
Number of gears	8
Speed range	70 – 2000 min¯¹

Spindle
Spindle chuck	Camlock DIN ISO 702-2 No.5
Spindle bore/rod passage diameter	53 mm

Tailstock
Chuck	50 mm
Quill stroke	110 mm

Tool clamping
Tool holder chuck size	30 mm

Travel
Travel X axis	98 mm
Travel Z axis	185 mm

Work areas
Max. height	200 mm
Max. width	1000 mm
Swing diameter above machine bed	400 mm
Swing diameter above planing slide	250 mm
Explanation Swing diameter above planing slide	Please note that when installing third-party lathe chucks or faceplates to achieve the specified technically possible turning diameter, operator modifications are required.

Hardened and ground Z-axis guideway
Spindle mount Camlock DIN ISO 702-2 No. 5
Guaranteed concentricity of the spindle nose better than 0.015 mm
Gears and shafts hardened and ground, running in an oil bath in precision bearings
Tailstock with hardened and ground quill
DC 24 Volt - electrics
All gears of the feed gear made of steel, hardened and ground, shafts on needle bearings All components are lubricated in an oil bath
Right / left rotation on bed sled switchable
Safety handwheels with release function in the X and Z axis
Emergency stop device
Perfectly concentric Main spindle guarantees high load capacity thanks to mounted precision tapered roller bearings
Hinged chip compartment for easy chip removal from the front
Machine base in stable steel construction
Coolant pump with coolant reservoir and level indicator. Removable container for easy cleaning
With safety device against simultaneous operation of threading and feed mechanism
Handwheels, decoupled and tested to EN 23125
Switch with life cycle calculation tested according to EN ISO 13849
LED machine lamp in chip protection
Motor electrically braked
Three-jaw chuck O 200 mm, No. 5 in the standard scope of delivery
User-friendly membrane keyboard
Two-channel right-left switch, tested to EN 23125