Optimum drejebænk OPTIturn TH 4210D

116.250,00 kr

Inkl. moms

Optimum drejebænk TH 4210D

Precise head and spindle lathes, sophisticated technology, complete equipment, easy to operate

Antal

Beskrivelse
Tryk for produktinfo

Cooling lubricant system
Coolant pump output	100 W

Dimensions and weights
Length	1940 mm
Width/depth	915 mm
Height	1600 mm
Weight approx.	1160 kg

Drive output
Main motor	4.5 kW

Electric Data
Supply voltage	400 V
Mains frequency	50 Hz

Electrical connections
Total rated value	4.6 kW

Feed
Longitudinal feed range	0.05 – 1.7 mm/rev
Number of longitudinal feeds	17
Flat feed range	0.025 – 0.85 mm/rev
Number of flat feeds	17

Pitches
Metric pitch	0.2 – 14 mm/rev
Number of metric pitches	39
Imperial pitch	72 – 2 Threads/1"
Number of imperial pitches	45
Diametrical pitch	8 – 44
Number of diametrical pitches	21
Modular thread pitch	0.3 – 3.5 mm/rev
Number of modular thread pitches	18

Speed range
Number of gears	16
Speed range	45 – 1800 min-1

Spindle
Spindle chuck	Camlock DIN ISO 702-2 No. 6
Spindle bore/rod passage diameter	52 mm
Spindle cone	MT 6
Tool holder max. chuck height	20 mm

Tailstock
Chuck	MT 4
Quill stroke	120 mm
Quill diameter	50 mm

Travel
Travel X axis	140 mm
Y axis	230 mm

Work areas
Max. height	210 mm
Max. width	1000 mm
Swing diameter above machine bed	420 mm
Swing diameter in bed bridge	590 mm
Swing diameter above planing slide	250 mm
Turning length in bed bridge	260 mm
Bed width	250 mm

Hardened and ground Z-axis guideway
Spindle mount Camlock DIN ISO 702-2 No. 6
Precisely crafted sled
Handwheels with adjustable fine scale 0.04 / 0.02 mm
Quadruple tool holder
All guides can be adjusted by wedge strips
Adjustment range upper slide ± 90 °
Guaranteed concentricity of the spindle nose better than 0.015 mm
Main spindle running in oil bath
Gear wheels smooth, hardened and ground with 2 adjustable precision tapered roller bearings
Handwheels decoupled and tested according to EN 23125
Two-channel right-left switch tested to EN 23125
Switch with life cycle calculation, tested according to EN ISO 13849
All metric pitches in the range of 0.2 to 14 mm / rev and all inch threads in the range of 72 - 2 pitch per inch are adjustable without change of the change gears by lever in the control panel
Right / left rotation on bed carriage via switching spindle switchable
Central lubrication in the bed slide
Substructure and machine bed made of casted Meehanite cast in one piece
leading spindle
Emergency stop device with foot control
Safety handwheels with release function in the X and Z axis
Tailstock for taper turning ± 10 mm adjustable
Tailstock quill and hand wheel with adjustable fine scale 0.025 mm
Fast, easy and tool-free adjustment by means of a clamping lever
Strongly ribbed prism bed, induction hardened and precision ground from gray cast iron
Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN
LED machine lamp in chip protection:
Digital position indicator DPA21
User-friendly membrane keypad, splash-proof, closed and glare-free
Supplied sensor for recording the spindle speeds
Glass scales