| Work areas |
|---|
| Max. height |
230 mm |
| Max. width |
1060 mm |
| Swing diameter above machine bed |
460 mm |
| Swing diameter in bed bridge |
690 mm |
| Swing diameter above planing slide |
270 mm |
| Turning length in bed bridge |
240 mm |
| Bed width |
300 mm |
- Hardened and ground Z-axis guideway
- Precisely crafted sled
- Handwheels with adjustable fine scale 0.04 / 0.02 mm
- Quadruple tool holder
- All guides can be adjusted by wedge strips
- Waves, wheels and main spindle running in oil bath
- Adjustment range upper slide ± 90 °
- Guaranteed concentricity of the spindle nose better than 0.015 mm
- Gear wheels smooth, hardened and ground with 2 adjustable precision tapered roller bearings
- Fast-switching feed gear in a closed design, gears and shafts hardened and ground in an oil bath in precision bearings running
- Handwheels decoupled and tested according to EN 23125
- Two-channel right-left switch tested to EN 23125
- Switch with life cycle calculation, tested according to EN ISO 13849
- Right / left rotation on bed carriage via switching spindle switchable
- Mechanical longitudinal feed-out shut-off of the bed carriage with four adjustable eccentrics leading spindle
- Emergency stop device with foot control
- Safety handwheels with release function in the X and Z axis
- Adjustable scale of the threaded clock
- Central lubrication in the bed slide
- Tailstock for taper turning ± 10 mm adjustable
- Tailstock quill and hand wheel with adjustable fine scale 0.025 mm
- Fast, easy and tool-free adjustment by means of a clamping lever
- Strongly ribbed prism bed, induction hardened and precision ground from gray cast iron
- Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN
- Large dimensioned chip guard with integrated LED machine lamp
- Quick change steel holder SWH 5-B
- Steel holder 25 x 120 type D for square chisel 250 mm
- Digital position indicator DPA 21 with speed display
- Fixed bezel passage max. Ø 160 mm
- Running bezel passage max. Ø 100 mm
- LED machine light
- Reduction sleeve MK 6 / MK 4 (TH 4210D-TH 4620D)
- Fixed centering point MK 4
- Quick change steel holder 5-B
- Steel holder 25 x 120 type D for square chisels
- Threading gauge
- Position stop with fine adjustment
- Change gear set
- Initial machine filling with quality oil
- operating tool
Do not forget the lathe chuck!
